Civil Engineering Interview Questions
Interview Questions By Engr. Ubaid Ahmad Mughal
Some Common Questions asked in every interview are as follows: 1) Introduce Yourself and tell me about your achievements (if any). 2) Why do you think this job is best for you or why you are the best person for this job ? 3) In which company you are doing job and why you want to leave it ? 4) Some People would also ask you about your strengths and weaknesses. 5) What is your current Salary ? 6) Some people would also inquire about your hobbies etc.
Technical Questions Asked in an interview depends on the type of job like if the job is related to Inspecting a Site (Site Engineer) then most of the questions will be related to field and tests performed in field and in lab. The Most Important thing which a person should keep in mind is that the person who is taking your interview will look for the confidence in you.It is not compulsory that you answer all the questions perfectly or you to know each any every answer of the questions asked but what ever you say with confidence and if u don’t know an answer always remember that don’t give wrong answer as it will have bad effect on them. Say that i don’t have the answer in mind right now or just say sorry i don’t know. Eye contact is important while giving answer it will also make a good impression on them. Dress Properly and speak like an engineer. Try to give answer in the same language the question was asked. Some of the General Questions can be found as follows:-
-
What happens to Load at yielding ?
-
What is Critical Path in Ms-Project ?
-
where will be the reinforcement of slab placed when there is an inverted beam and the bottom of the beam and slab are at same level ?
-
What is Passive earth pressure ?
-
Which condition will prevail for the design of a swimming pool ? when th e pool is empty or when it is filled ?
-
What will be the effect of over reinforcement ?
-
What is Planning ?
-
What is the comprevsive strength of Brick ?
-
What is the water absorption of first class brick ?
-
Why we provide steel in Concrete ?
-
Define Shear Force and in a structure subjected to gravity loads where will be the shear force ?
-
Which are the Steel tests ?
-
Which are the concrete Tests?
-
Initial & final setting time of concrete?
-
Brick strength is more or concrete block?
-
Why in Pakistan Bricks are used so much?
-
In a cantilever …where will the steel be provided and why?
-
What is Plinth Level and Sill Level?
-
How many bricks are there in 100cft?
-
28 days compressive strength of concrete in PSI?
-
What is slump Test?
-
How can u check the diameter of steel after the construction?
-
What is specific gravity?
-
How cracks in concrete can be avoided?
-
Types Of DPC and its Thickness used?
-
28 Days Strength of Concrete (1:2:4)?
-
Strength of brick?
-
what is Brest Wall?
-
what is Brick crushing strength(PSI)?
-
what is Bearing Capacity,How to determine it?
-
How much is the curing time period?
-
How many types of slabs are there & how to design it?
-
How many are the types of joints?
-
Why joints are provided?
-
How many bricks are there in 100cft?
-
Types Of DPC and its Thickness used?
-
How many bricks are there in 100 cft?
-
Which are the Steel tests ?
-
How much is the cover for slab?
-
“Interview Questions for MSc-Structures”
-
What is Packing Factor ?
-
Forces in a Shear Wall are in plane or out of plane ?
-
What is fineness modulus ? and its sieve # ?
-
What is Base Shear ?
-
What is Time period of a building and its relation with frequency ?
-
There are two buildings one taller and one shorter whose time period will be grater and similarly the frequency ?
-
Workability ?
-
Sulphate Resisting Cement ?
-
Special thing in designing a overhead reservoir ? which is different from an ordinary design
-
Maximum %age of Steel in columns and beams ?
-
how many cft in one cement bag?
-
what are 5’c and 5’m in project management?
-
Types of foundation?
-
Bearing Capacity of Lahore soil?
-
Why we perform compaction ?
-
Dimentions of Foundation are calculated on basis of ??
-
Density of steel in lb/inch^3?
-
Dimentions of Standard Brick?
-
Slump Value ?
-
forces in truss ?
- what are Building standards ?
- If every other thing remains constant (including load) then Strain will be higher in ? Grade 60 or Grade 40 ?
MORE INTERVIEW AND TEST QUESTIONS
-
- Punjab Public Service Commission (PPSC) Test Questions for Post of Assistant Director Works (Civil) by Muhammad Aboubakar
- Punjab Public Service Commission (PPSC) Interview questions for the post of Sub Divisional Officer (SDO) in irrigation department government of Punjab
- PPSC Irrigation Interview Questions By Khush Bakht Zahra
-
- PPSC Interview Questions Irrigation Department By Nabeel Khokhar
-
- DESCON GETP Test Tips By Numair Farooq
-
- Water and Power Development Authority (WAPDA) NTS Test Question By Taimoor Hashmi
-
- Water & Power Development Authority (WAPDA) NTS Test Questions 2 By Ziaullah UET peshawar
-
- WAPDA NTS Test Questions with Answers By Engr. Muhammad Umer Javaid (BZU Multan)
- WAPDA Jr. Engineer (Civil) WAPDA GM (C&M ) Water Conducted by PTS on 19-08-2018 ( 89 questions with answers ) By Taimoor Nasir UET LAHORE
- 75 Civil Engineering Interview Questions By Parvesh Pal Meerut From India
- DESCON General Interview Questions by Khushbakht Zahra
- 200 Short Questions and Answers in Civil Engineering By Vincent T.H. CHU
Want to write articles or share your thoughts/experience or any other interesting thing ?
Interview Questions, Interview Questions, Interview Questions, Interview Questions, Interview Questions, Interview Questions, Interview Questions
Dear Mr Ubaid your efforts are highly appreciated…
Thanks
yr yh bokks etc download ni ho rhin.. kiyaa procedure hy..
kindly guide me
Membership is required. Procedure Sent. Check MAIL.
Kindy send answers for 62 questions
Google them
eng.naeemzimri@gmail.com
javedzimri@hotmail.com kindly send procudere of membership
Sent. Check Mail
Send me please
Only Members can download.
http://civilengineerspk.com/membership/
Jazak Allah for your efforts guys.
Thank you.
Welcome
it would be the best if you provide answers to these above mentioned questions
Some of them contain answers as well ( those in brackets are answers )
Sir,
Very good u are helping graduate freshers but I would like u to help me too. In fact i need a software for structural design of concrete structural buildings. pl advise.
Thanks
Manoj
Thanks
All softwares are uploaded here http://civilengineerspk.com/softwares/
appriciable.. 🙂
thnks
THANKING YOU FOR PUBLISHING A VALUABLE SITE FOR CIVIL ENGINEERS AND IT HELPS FRESHERS
ur welcome
Interviews
Interview ques are highly appreciated
thanks
Interview ques are highly appreciated and it is good for engineer to get confident him self
N.Balraj
G.M,(projects)
bangalore
Thanks
Sir u r doing a great job for students; thumbs up for that.
will u please upload some of the questions of MS CIVIL departmental test of UET lhr ??
Thanks. That was conducted first time. Lets see if anyone has any questions saved 😛
By God dil krta ha k js js ne bhe is site pe kam kia ha aur itni pyari site hm jaise fresher k lye bnai ha us ko choom ln
lol he was a fresher once 😛
Awesome
thanks 🙂
SIR IF U PROVIDE ANSWERS FOR ALL INTERVIEW QUESTIONS… IT WOULD BE BETTER FOR ALL……..THK U SO MUCH FOR UR EFFORT FOR PROVIDING THESE…….
if answers are provided then people will stop searching for them. We want you to explore things
Sir can u please upload important questions for FPSC test for EXecutive ENGINEER post??
http://civilengineerspk.com/jobs-scholarships/interview-questions/
>>>>>>SOME IMP QUESTION WITH ANSWER ( ABBAS TAHIR )……………….see the question where it is said that 1 cum has 300 no. of bricks………………Dear your answer is wrong…..1 cum has 500 numbers of brick………………
Make sure ur answer is right when posting in such a forum…….THANKS
Thanks For Letting us know. We have Corrected It.
Vol. Of One Brick=20*10*10cm =.2*.1*.1m=.002 m3
And now no. of brick in one m3 =1֥002=500 brick
sir u r doing a remarkable job….will u plz upload some questions which were asked in ppsc test for sdo irrigation in previous years
Let me Try that as well
plz send me this answer
this which ?
sir plzzzzzzzzz provide answers…..I have an interview and i dont have to much time to find all the answers….plz
YOU SHOULD SEARCH FOR THEM. You will get more info this way. We don’t have answers anyway
Well done
Thanks
it is great for all civil engineer to learn your question.
but again on top of that if you could give answer also we will be great leaner.
http://civilengineerspk.com/interview-questions/questions-with-answers/
Send as soon as possible
send what ?
i have seen all question that is realy knowledgeable for us….it is appreciable for the all concern ….kindly i much need RCC w.morgan solution note…..if can guide me through the Email (tariqm937@yahoo.com)…..i will be very thankfull for your kind help
i am the student of C.T 3rd year
if its not available on the site then we probably dont have it yet. Thanks
Great work! Keep it up 🙂
Thank you and you are always welcome to work with us.
The 5 M in construction is
Money
material
machinery
manpower
and management.
But I don’t know 5C can u tell me that
inspirational work from your team….
please guide me through the process of membership…..
its fantastic work from your team. I want membership please guide me through the process…..
Sent. Check Mail and Thanks
want the membership please guide and need all past paper in soft of civil
Membership Procedure Emailed. Check
please send membership procedure !!
Sent. Check Mail
AoA
koi guid kry ga? ppsc bs14 for public health department k liye mny apply kia hai.. kindly koi bta skta hai k test ki prepration kahn sy kru mn… meny DAE civil ki hoi
You can find many PPSC questions here